ENGRUSUKR
We will show you the way

Emergency power units

Home / Catalog of products / Emergency power units

STABILAR

STABILAR Emergency Power Unit

General description

СТАБИЛАР

СТАБИЛАР

Emergency Power Unit switches one of the fluorescent lamps of the working light into the emergency mode in case of the network power failure. The emergency power unit can be integrated in the existing fluorescent work lights. One power unit is used for one lamp. Emergency power unit consists of an electronic power unit combined with the control, battery and information LED assembly system.

The energy stored in the batteries is used to support the battery in case of a power failure. The required illuminance in the emergency mode is usually considerably lower than in the normal operation mode, so the luminous flux of the fluorescent lamp in the emergency mode is lower than in the normal mode.

The emergency power unit linear dimensions allow to build the unit into practically any luminaire with linear fluorescent lamps.

  • Complies with GOST R MEK 924 - 98;
  • Used with linear and compact fluorescent lamps;
  • Guarantees 1 or 3 hours' emergency mode operation time;
  • Works in the permanent and nonpermanent modes;
  • Special LED shows the battery charge process;
  • Small size;
  • Independent power source - NiCd high temperature battery;
  • Electronic power unit combined with the control system provides protection against the battery deep discharge.

Read more on stabilar.com


Parameter matrix

Tender description:

STABILAR BS-58-1 emergency power unit for fluorescent lamps with the capacity no more than 58W, emergency mode 1 hour, 220 V, I class, IP20, compatibility with electro-magnetic and electronic control gear, compatibility with Telecontrol, 5 commutation poles, switched mode power supply, protection against deep discharge.

Tender description:

STABILAR BS-58-3 emergency power unit for fluorescent lamps with the capacity no more than 58W, emergency mode 3 hours, 220 V, I class, IP20, compatibility with electro-magnetic and electronic control gear, compatibility with Telecontrol, 5 commutation poles, switched mode power supply, protection against deep discharge.

Tender description:

STABILAR BS-80-1 emergency power unit for T5 24, 39, 49, 54, 80W fluorescent lamps (for switching one lamp into the emergency mode permanently or temporarily), emergency mode 1 hour, I class, IP20, compatibility with electronic control gear, NiCd battery.

Tender description:

STABILAR BS-80-3 emergency power unit for T5 24, 39, 49, 54, 80W fluorescent lamps (for switching one lamp into the emergency mode permanently or temporarily), emergency mode 3 hours, I class, IP20, compatibility with electronic control gear, NiCd battery.


Dimentions

Dimentions - STABILAR Emergency Power Unit

Catalog of products

Download description

«STABILAR Emergency Power Unit»
in PDF file

© 2000-2011, LLC Bely Svet 2000

In today’s society, the interest to human safety and emergency management systems is increasing. That’s why our main goal is to enhance the safety level of the living environment, and this goal can mainly be achieved by responding to the need of the market in the emergency lighting systems.

(495)785-17-67

Address: 12 Fakultetskiy pereulok, Moscow, 125080
Email: info@belysvet.ru

Website created by WBB Russia
Продвижение сайтов - BIGindex